Raspberry Pi X860 M.2 NGFF 2280/2260/2242/2230 SATA SSD NAS Storage Expansion Board with USB 3.0 Jumper for Raspberry Pi/ROCK64

Have Question?

Price: $ 27.99

Shipping is $ 0.00 to United States via Free Shipping

Total:$ 27.99
  • ProductId: #2298
    SKuId: #3420
    Sku Code: #S4115
    Weight: 0.13kg

    Description

    [Overview]

    This X860 M.2 NGFF SATA SSD Shield provides a complete storage solution for raspberry pi, it Supports up to 2TB m.2 NGFF SSD solid-state drive.

    [NOTE]

    Only support M.2 NGFF 2280/2260/2242/2230 SSD hard drive!

    wiki: X860 User Manual(http://www.raspberrypiwiki.com/index.php/X860)

    [Features]

    • Ideal storage solution for Raspberry Pi -M.2 NGFF SATA SSD Shield
    • Supports up to 2TB m.2 NGFF SSD solid-state drive
    • Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
    • Supports operating system installation and booting from your SSD
    • Supports faster OS image writing (>300Mb/S*) from a PC or a Mac
    • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
    • USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
    • Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
    • USB bus-powered
    • LED blue indicator indicates drive status
    • Specially-made USB3.0 connector?to connect with Raspberry Pi - no additional cables needed
    • On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
    • Fully compatible with X720, X730 and X735 for intelligent and safe power management
    • PCB Size: 87mm x 56mm

     

    [NOTE]

    • USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
    • NGFF SATA SSD is not included
    • Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
    • As with all SSDs, new media must be formatted before use
    • Performance depends on host system, workload, and SSD media used
    • SSDs use exceptionally high performance storage media that will run hot when under load
    • Older SSD drives with less efficient flash media may not perform as well as newer drives
    • We only test it on Raspberry pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0;

     

    [Power supply request]

    • 5Vdc +/-5% , Powered by Raspberry Pi
    • Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
    • 5Vdc via on-board micro-USB or XH2.5 2Pin connector

     

    [Matching Metal Case(Not Included)]

    • Please refer to X850#X850_V4.0_metal_case
    • Ports & Connectors
    • USB socket - USB 3.0 type A x 1
    • Micro-USB SSD power socket x 1
    • XH2.54 SSD power input port x 1
    • 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1

     

    [Packing List]

    • 1 x X860 Board
    • 1 x USB3.0 Connector
    • 1 x USB 3.0 A-Male to A-Male Data cable   (about 60cm)  
    • 1 x Screws Pack
    • 1 x Screwdriver
    Image Gallery
    Questiones & Answers