Raspberry Pi X870 NVME M.2 2280/2260/2242/2230 SATA SSD NAS Expansion Board with USB 3.0 Jumper for Raspberry Pi 3b+/3B/ROCK64

Meta information

Location: China
Sku#: #S4114
Weight: 0.13kg

Have Question?

$ 35.71

Free Shipping
$ 0.00 to United States

Total: $ 35.71
Payment Accept

  • Description


    This is the X870 NVMe M.2 SSD Storage Expansion Board, it provides a complete storage solution for raspberry pi or ROCK64. It supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230.

    WIKI: X870 User Manual(http://www.raspberrypiwiki.com/index.php/X870)


    Only support M.2 NVMe 2280/2260/2242/2230 SSD hard drive!


    • Ideal storage solution for Raspberry Pi - M.2 NVMe SSD Shield
    • Supports up to 2TB M.2 NVMe SSD solid-state drives
    • Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230
    • Supports operating system installation and booting from your SSD
    • Supports fastest OS image writing (>1Gb/S*) from a PC or a Mac
    • Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s bridge controller
    • USB2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
    • Quick file transfer with high-speed USB3.1 Gen1 5Gb/s or Gen2 10Gb/s connectivity from a PC or a Mac
    • LED blue indicator indicates drive status
    • On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 11.5Watts)
    • USB bus-powered
    • Specially-made short USB Type-C to USB-A 3.0 cable to connect with Raspberry Pi
    • Fully compatible with /X720 / X730 and X735 for intelligent and safe power management
    • PCB Size: 87mm x 56mm


    • Test condition: USB3.1 Gen 2 port, SSD sequential write speed >1000MB/s
    • NVMe SATA SSD is not included
    • Compatible with NVMe M.2 SSDs
    • Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
    • As with all SSDs, new media must be formatted before use
    • Performance depends on host system, workload, and SSD media used
    • SSDs use exceptionally high performance storage media that will run hot when under load
    • Older SSD drives with less efficient flash media may not perform as well as newer drives

    [Power supply request]

    • 5Vdc +/-5% , Powered by Raspberry Pi
    • Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
    • 5Vdc via on-board micro-USB or XH2.5 2Pin connector


    [Packing List]

    • 1 x X870 Board
    • 1 x USB3.0 Type A to Type C cable(length: 10cm)
    • 1 x Screws Pack
    • 1 x Screwdriver


    Questiones & Answers